The Comprehensive Process To Set up the Arlo Security Camera

The Comprehensive Process To Set up the Arlo Security Camera

Arlo security camera gives you everyrnseveral causes to buy it. When you are not at home, then you can see yourrnvisitor on your device by downloading the Arlo app. Also, this security systemrnprovides several features to keep secure your house and office. If you arerngoing to buy this security system and you want to know how you can set ArlornSecurity camera, then you need to make a call on Arlo SupportrnNumber to know about the setup procedure. Support executives will also,rnprovide you more information about this wire-free security system. 

rnrn

Performrnthe steps to set-up & sync Arlo security camera

rnrn

     First,rnyou need to unlock the Arlo camera battery compartment by holding & slidingrnthe latch.

rnrn

     The,rnyou need to slide the door of the Arlo camera battery & lift it for openingrnthe compartment.

rnrn

     Now,rnyou need to insert the battery & close the camera battery door.

rnrn

     Yournshould place your security camera one to three feet from the base station.

rnrn

      Sync your Arlo camera from the base station.

rnrn

# when you use the Arlo base station,rnthen you need to press the sync button upon the side and you have to on back ofrnthe base station approx 2 seconds & release the button.

rnrn

(Important Note- whenrnyou press the Arlo camera sync button upon the Arlo base station for a longrntime, then the LED in the USB symbols will blink amber approx 10 minutes. Whenrnthe USB LED blinks amber, that means your sync process will be blocked.)

rnrn

# When you use the Arlo pro basernstation, then you need to hit the button upon the base station approx 2 secondsrn& after some time you have to release the button.

rnrn

     Yournhave to sync the status LED until blink green in color.

rnrn

     Thenrnyou have to press the sync button on the upper side of the Arlo camera approx 2rnseconds & then release the sync button.

rnrn

     Forrnconfirming the sync, a blue LED on the security camera blinks continuously.rnThat time, you need to repeat the process. If you are getting confused aboutrnthis, then dial Arlo Support PhonernNumber.

rnrn

     Now,rnon the base station, you need to check the Arlo security camera LED.

rnrn

     Ifrnyou see the Arlo camera LED upon the base station blinks in green color, thenrnyour sync procedure has completed.

rnrn

     Yournshould repeat this procedure for each Arlo camera. (Important note- when thernsync process does not complete under one minute, then you have to press thernsync button on the Arlo camera base station and try this process again. 

rnrnHope this information will be quite sufficientrnfor you. Still, you have any confusion & you are getting issues whilernapplying these methods, then you should make a call on Arlo Camera Tech SupportrnPhone Number. Here you can directly ask anything from the Netgear certifiedrnexecutives.

Source URL:

Security Shutters & Glass Replacement Electrical Services

Send Us A Message

Contact Details